×

APPLIED COMPOSITE MATERIALS

Archives
Volume--Issue-
Energy Absorption and Stiffness Balance in Modified and Conventional Syntactic Foams

Authors :- Agnese Maria Di Brisco , Sonia Migliorati , Andrea Ongaro


First-principles Prediction of Enhancing Graphene-Al Interface Bonding by Si-Doping

Authors :- Li Li , Ji-Hyun Lee , Steven K Sutton , ...


Manufacture of High-Performance Tidal Turbine Blades Using Advanced Composite Manufacturing Technologies

Authors :- Xavier Bry , Catherine Trottier , Frédéric Mortier , ...


Manufacturing and Experimental Evaluation of Microwave Cured Carbon/Epoxy Composites

Authors :- Guadalupe Gómez , M Luz Calle , Ramon Oller , ...


Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review

Authors :- Pierre Joly , Cécile Durand , Catherine Helmer , ...


Experimental and Numerical Studies on the Failure Mechanism of the Composite Scarf Joints with Bonding Flaws

Authors :- Harvey Goldstein , James Carpenter , Michael G Kenward , ...


Measurement of the Flexural Modulus of Chopped Carbon Fiber Tape Reinforced Thermoplastic with Short Beams

Authors :- Emmanuel Lesaffre , Helmut Küchenhoff , Samuel M Mwalili , ...


Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich

Authors :- Marcus VM Fernandes , Alexandra M Schmidt , Helio S Migon


Design of New Carbon-Phenolic Ablators: Manufacturing, Plasma Wind Tunnel Tests and Finite Element Model Rebuilding

Authors :- F. Martoïa, H. Rouland, M. Dkier, J.-Y. Charmeau & P. J. J. Dumont


Creep and Aging Evaluation of PhenolÐFormaldehyde Carbon Fiber Composites in Overhead Transmission Lines

Authors :- Arda Özen , Bilen Emek Abali , Christina Völlmecke, Jonathan Gerstel & Dietmar Auhl


Experimental Characterization of Short Fiber-Reinforced Composites on the Mesoscale by Indentation Tests

Authors :- Yong Mei, Boyu Ju, Wenshu Yang , Ziyang Xiu, Boyang Zhao & Gaohui Wu


Mussel Inspired Modification of Rubber Crumbs for Improved Interfacial Adhesion in Rubber Cement Mortar

Authors :- Chetan H. C., Subhaschandra Kattimani & S. M. Murigendrappa


A Novel Thermoplastic Composite for Marine Applications: Comparison of the Effects of Aging on Mechanical Properties and Diffusion Mechanisms

Authors :- Amanda Albertin Xavier da Silva , Riccardo Scazzosi , Andrea Manes & Sandro Campos Amico


Structural Optimization Design of a Typical Adhesive Bonded Honeycomb-Core Sandwich T-joint in Side Bending Using Multi-Island Genetic Algorithm

Authors :- Anna Dmitruk , Krzysztof Naplocha, Joanna Pach, Dariusz Pyka, Grzegorz Zió?kowski, Miros?aw Bocian & Krzysztof Jamroziak


Mitigating the Blunt Trauma of Soft Armour Panels using Polycarbonate Sheets: A Cost-effective Solution

Authors :- William Finnegan , Ronan Allen, Conor Glennon, James Maguire, Michael Flanagan & Tomas Flanagan


Fracture Toughness of Hybrid Carbon Fibre/Epoxy Enhanced by Graphene and Carbon Nanotubes

Authors :- S. K. Dasari, M. Rangapuram, O. Fashanu, K. Chandrashekhara, N. Iyyer & N. Phan


On the Influence of the Functionalization of Graphene Nanoplatelets and Glass Fiber on the Mechanical Properties of GFRP Composites

Authors :- Jiakang Zhou, Jieqiong Lin, Mingming Lu , Xiaoqin Zhou, Yongsheng Du & Chao Wang


Physico-chemical Characterization of PLA-based Composites Holding Carbon Nanofillers

Authors :- M. Ahmadifar , K. Benfriha, M. Shirinbayan & A. Tcharkhtchi


Applied Finite Element Procedure for Morphing Wing Design

Authors :- Sheng Zhang , Weikang Meng, Xiguang Gao, Yingdong Song & Zhiguo Zhang


Prediction Model of Gas Expansion and Electro-Thermal Coupling regarding Lightning Damage to Carbon Fiber Composites

Authors :- Yuru Su, Zhidong Guan, Xin Wang, Xiaodong Wang , Zengshan Li & Xia Guo


Analytical Solutions to Predict Impact Behaviour of Stringer Stiffened Composite Aircraft Panels

Authors :- Lucas Braga Lopes Gato, Sergio Luiz Moni Ribeiro Filho, Túlio Hallak Panzera , Maikson Luiz Passaia Tonatto, André Luis Christoforo & Fabrizio Scarpa


A Plane-Stress Damage Model for Vectran Laminated Composite

Authors :- Bing Cai, Zhenghong Yao, Xiaowen Zhang, Changyou Li, Xu Liu, Xiaorong Zhang, Ziyi Wang & Ce Zhang


Influence of Fiber Orientation and Fillers on Low Velocity Impact Response of the Fabric Reinforced Epoxy Composites

Authors :- Wentao He, Jun Wu, Lu Yao , Changzi Wang, Hao Zhang & Huancai Liu


Experimental Study on the Seismic Performance of Columns Reinforced by the CFRP Bar and Sheet

Authors :- Y. Zhang , L. Meng, Y. Wan, B. Xiao & J. Takahashi


The Perforation Resistance of Aluminum-Based Thermoplastic FMLs

Authors :- Yangyang Tao, Shanyong Xuan, Jie Tao, Kai Jin & Hao Wang


Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design

Authors :- Memduh Kara , Safa Ak, Mesut Uyaner, Alper Gunoz & Yusuf Kepir


Influence of Environmental Conditions on the Mechanical Properties of Flax Fiber Reinforced Thermoset Composites

Authors :- Yang Liu, Mingxuan Li, Qingsheng Li, Xiaofeng Lu & Xiaolei Zhu


In-Situ Investigation of Resin Shrinkage in the Composite Manufacturing Environment

Authors :- Junjie Ding, Zhigang Sun , Xihui Chen, Xuming Niu, Yu Jin & Yingdong Song


Thermo-Mechanical Compaction-Creep and Void Analysis of Prepregs Using XCT-Aided Geometrical Models

Authors :- Desheng Chu, Yue Ma , Peiyong Li, Hao Huang & Pengjun Tang


An Analysis of Process Parameters in the Hydroforming of a Hemispherical Dome Made of Fiber Metal Laminate

Authors :- Guang Yang, Hongwei Guo , Hong Xiao, Huayi Jiang & Rongqiang Liu


Constructing Hybrids Consisting of Porous Silica Particles and Carbon Nanotubes and their Polymer Composites

Authors :- L. Paglia , V. Genova, J. Tirillò, C. Bartuli, A. Simone, G. Pulci & F. Marra


Vibration Characteristics of Functionally Graded Porous Nanocomposite Blade-disk-shaft Rotor System Reinforced with Graphene Nanoplatelets

Authors :- G. C. Vasconcelos , T. F. A. Santos , C. C. Angrizani , L. A. Sales , M. L. Costa & E. C. Botelho


Experimental Study of Mechanical Behavior of 3D Angle-Interlock Woven Fabrics under Cyclic Load

Authors :- Vincent Sessner, Wilfried V. Liebig , Alexander Jackstadt, Dominik Schmid, Tom Ehrig, Klaudiusz Holeczek, Nils Gräbner, Pawel Kostka, Utz von Wagner, Kay A. Weidenmann & Luise Kärger


Effect of Sintering Temperature on the Interfacial and Mechanical Properties of SiC Fiber Reinforced Mullite Matrix Composites

Authors :- Cheng Wei, Pengfei Tang, Yushan Chen, Laibao Liu, Lihua Zhang, Chuanbei Liu, Yunsheng Zhang, Faqin Dong, Youhong Tang & Hongping Zhang


In-situ Growing Carbon Nanotubes on Nickel Modified Glass Fiber Reinforced Epoxy Composites for EMI Application

Authors :- Haithem Bel Haj Frej , Romain Léger, Didier Perrin & Patrick Ienny


Vacuum-Bag-Only (VBO) Molding of Flax Fiber-reinforced Thermoplastic Composites for Naval Shipyards

Authors :- Lourdes Ramos-Galicia, Christian Daniel Reyes-Vazquez, Ana Laura Martínez-Hernández , Julio Alejandro Rodríguez-González, Carlos Rubio-González, Armando Almendarez-Camarillo & Carlos Velasco-Santos


Artificial Neural Network (ANN)-Based Residual Strength Prediction of Carbon Fibre Reinforced Composites (CFRCs) After Impact

Authors :- Julian Popp , Tobias Kleffel, David Römisch, Thomas Papke, Marion Merklein & Dietmar Drummer


Micro-CT Based Statistical Geometry Modeling and Numerical Verification of 2.5D Sicf/Sic Composite

Authors :- M. A. Laribi, S. Tamboura, J. Fitoussi, M. Shirinbayan, R. Tie Bi, A. Tcharkhtchi & H. Ben Dali


Effects of Thermal Residual Stresses on Tensile and Interlaminar Shear Behaviors of GLARE Laminates

Authors :- Yan Liu, Zhigang Sun , Xuming Niu, Xihui Chen, Yingdong Song & Pengjian Zou


Vacuum-Assisted Hot-Forming Using Tailored Laminate Temperature

Authors :- Yiran Niu, Xiwu Xu & Shuxiang Guo


Modeling the Effect of Oxidation on the Creep Behavior of SiC/PyC/SiC Mini-composites Under Wet Oxygen Atmosphere

Authors :- Mukesh Bajya, Abhijit Majumdar, Bhupendra Singh Butola, Unsanhame Mawkhlieng & Debarati Bhattacharjee


A Pragmatic Approach for Modelling the Viscoelastic-Viscoplastic Behaviour of Short-Fibre Reinforced Thermoplastics Coupled with Anisotropic Damage

Authors :- Vigneshwaran Gnanakkan Samuel Veerakumar , Balasivanandha Prabu Shanmugavel & Sivasankaran Harish


Evaluation of Flow-Mesh Influence in Resin Injection Processes

Authors :- Fengyang Jiang, Zhidong Guan, Xiaodong Wang , Zengshan Li, Riming Tan & Cheng Qiu


Development of CFRP with Polyaniline-based Resin using Curable Dopants Employing Storage Stable Prepregs

Authors :- Todor Batakliev , Vladimir Georgiev, Cristiane Kalupgian, Pablo A. R. Muñoz, Hélio Ribeiro, Guilhermino J. M. Fechine, Ricardo J. E. Andrade, Evgeni Ivanov & Rumiana Kotsilkova


Crashworthiness of Aluminum-Composite Hybrid Tubes

Authors :- Yu Shi, Bin Du , Qian Liu, Yuxiang Mai, Yushun Zhao & Jie Gao


Percolation Threshold of the Thermal, Electrical and Optical Properties of Carbonyl-Iron Microcomposites

Authors :- S. I. B. Syed Abdullah , L. Iannucci, E. S. Greenhalgh & Z. Ahmad


A Review on the Kenaf Fiber Reinforced Thermoset Composites

Authors :- Jun Zhao, Wenbo Ren, Xiaohui Ruan , Xinglong Gong & Chenzhe Si


Interleaving CFRP and GFRP with a Thermoplastic Ionomer: The Effect on Bending Properties

Authors :- Nassier. A. Nassir, R. S. Birch, W. J. Cantwell, M. Al Teneiji & Z. W. Guan


Application of X-ray Computed Tomography to Measuring Fiber Orientation Distribution of Chopped Carbon Fiber Tape Reinforced Thermoplastics

Authors :- Ariff Farhan Mohd Nor, Mohamad Zaki Hassan, Zainudin A. Rasid, Sa’ardin Abdul Aziz, Shamsul Sarip & Mohd Yusof Md Daud


Bamboo like SiC Nanowires Grown in a Dual-Temperature Zone Reaction System Enhance the Oxidation and Thermal Shock Resistance of SiC Coatings

Authors :- Anurag Pisupati , Leila Bonnaud , Mylène Deléglise-Lagardère & Chung Hae Park


Experimental and Numerical Study on Softened Inclusions Equivalent Method for Impacted Stiffened Panel Skin

Authors :- K. Naresh, A. Salem, K. A. Khan , W. J. Cantwell & R. Umer


Mesoscale Solid-beam Mixed Mechanical Model of Needle-punched Carbon/Carbon Composite

Authors :- Hamza Blala , Lihui Lang, Shahrukh Khan, Lei Li & Sergei Alexandrov


Adhesion Improvement of Thermoplastics-Based Composites by Atmospheric Plasma and UV Treatments

Authors :- Yu Liu, Benhui Fan, Paul Haghi-Ashtiani, Delong He & Jinbo Bai


Enhancement of Static and Fatigue Strength of Short Sisal Fiber Biocomposites by Low Fraction Nanotubes

Authors :- Tian Yu Zhao , Zi Feng Liu, Hong Gang Pan, Hong Yuan Zhang & Hui Qun Yuan


Analysis of Induction Heating Temperature Field of Plain Weave CFRP Based on Finite Element Meso Model

Authors :- Zhenghao Tian, Xun Sun, Guihang Deng, Ru Jiang, Haitao Liu & Yunxin Liu


Development of Eco-friendly Shock-absorbing Cork Composites Enhanced by a Non-Newtonian Fluid

Authors :- Yu Liu, Delong He, Olivier Dubrunfaut, Anne Zhang, Lionel Pichon & Jinbo Bai


The Numerical Approach to Mosaic Patterns in Filament-Wound Composite Pipes

Authors :- V. Popineau, A. Célino, M. Le Gall, L. Martineau, C. Baley & A. Le Duigou


Effect of Pyrolytic Carbon Interface Thickness on Conductivity and Tribological Properties of Copper Foam/Carbon Composite

Authors :- Tiantian Yang, Haipeng Qiu, Xiaodong Liu, Ling Wang, Weijie Xie, Xiaomeng Wang, Diantang Zhang , Diansen Li & Kun Qian


The Influence of Crystallinity on the Weather Resistance of CF/PEEK Composites

Authors :- Weiwei Qu, Ruming He , Qing Wang, Liang Cheng, Di Yang, Jiaxin Gao, Han Wang, Qian Yang & Yinglin Ke


Improvement of Specific Energy Absorption of Composite Tubular Absorbers using Various Stitching Pattern Designs

Authors :- Hao Wang, Huaguan Li, Yingmei Xu, Yanyan Lin, Hongli Li & Jie Tao


Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations

Authors :- Tommy Grankäll , Per Hallander & Malin Åkermo


Influence of Large Framed Mold Placement in Autoclave on Heating Performance

Authors :- Yi Wang , Ao Zhang, Guang-de Li, Shao-peng Liu, Yang Xiang & Hai-feng Cheng


Curing Cycle Optimization for Thick Composite Laminates Using the Multi-Physics Coupling Model

Authors :- Delphine Notta-Cuvier , Mariem Nciri, Franck Lauro, Fahmi Chaari, Bassem Zouari & Yamen Maalej


Modeling Thermal Expansion Behavior of 2.5 D C/SiC Composites in Air Oxidizing Environments between 400 ¡C and 800 ¡C

Authors :- Carla Machado Bulsing Dutra , Sandro Campos Amico & Jeferson Avila Souza


Mechanical Properties and Growth Mechanism of TiB2-TiC/Fe Composite Coating Fabricated in Situ by Laser Cladding

Authors :- S. Pati, S. Manomaisantiphap, T. Goto, T. Takahashi & T. Yokozeki


Fabrication and Characterization of Hemp Fibre Based 3D Printed Honeycomb Sandwich Structure by FDM Process

Authors :- Tanja Marina Vetter , Sebastian Eibl & Hans-Joachim Gudladt


Fabrication, Design and Application of Stretchable Strain Sensors for Tremor Detection in Parkinson Patient

Authors :- I. Y. Forero-Sandoval , F. Cervantes-Alvarez, J. A. Ramirez-Rincon, J. D. Macias, N. W. Pech-May , J. Ordonez-Miranda & J. J. Alvarado-Gil


On the Difference Between the Tensile Stiffness of Bulk and Slice Samples of Microstructured Materials

Authors :- Hongyang Dang, Yunfeng Cao, Ruqiang Zhang, Zhu Long, Shuai Guo, Shihua Wang & Zhiqiang Li


Impact Damage Characteristics of Carbon Fibre Metal Laminates: Experiments and Simulation

Authors :- Guangbin Cai, Takehiro Shirai, Yi Wan, Kiyoshi Uzawa & Jun Takahashi


Impact Response of Curved Composite Laminates: Effect of Radius and Thickness

Authors :- Jialiang Liu, Yuntao Li, Dong Xiang , Chunxia Zhao, Bin Wang & Hui Li


Effect of Stress Ratio on Fatigue Behaviour of Non-Crimp Fabric Composites at Room and Elevated Temperatures

Authors :- Xin Wang, Jun Huang, Xiao Huang, Yuru Su, Zengshan Li & Riming Tan


Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene

Authors :- Gennaro Scarselli, Dong Quan , Neal Murphy, Brian Deegan, Denis Dowling & Alojz Ivankovic


Damage Detection in Composites By Artificial Neural Networks Trained By Using in Situ Distributed Strains

Authors :- Reza Sourki, Bryn Crawford, Reza Vaziri & Abbas S. Milani


Composite Manufacturing Cost Model Targeting on Design Optimization

Authors :- Yu Feng , Binlin Ma, Tiejun Zhang, Teng Zhang, Yuting He & Shenbo Jiao


Virtual Description of Non-Crimp Fabrics at the Scale of Filaments Including Orientation Variability in the Fibrous Layers

Authors :- Selim Gürgen, Fábio A. O. Fernandes, Ricardo J. Alves de Sousa & Melih Cemal Ku?han


Zero-Waste Recycling of Shelf-Cured Pre-Impregnated Carbon Fiber Reinforced Epoxy Laminae

Authors :- Pawe? Stabla , Micha? Smolnicki & Wojciech B?a?ejewski


Electrical Resistance Curing Method for Hybrid Metal-CFRP Tubes

Authors :- Cheng-Hung Shih, Chang-Pin Chang, Yih-Ming Liu, Yu-Liang Chen & Ming-Der Ger


Effects of CVD Carbon on the Erosion Behavior of 5D Carbon-Carbon Composite in a Solid Rocket Motor

Authors :- Pei Wang, Guanyu Deng, Hongtao Zhu, Jian Yin, Xiang Xiong & Hongbo Zhang


Preparation, Adsorption Properties and Microwave-Assisted Regeneration of Porous C/SiC Ceramics with a Hierarchical Structure

Authors :- Stergios Goutianos, Norbert O. Cabrera, Ben Alcock, Neil Reynolds & Ton Peijs


Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers

Authors :- Xueming Wang, Fuyuan Xie, Min Li & Zuoguang Zhang


A Modeling Method of Continuous Fiber Paths for Additive Manufacturing (3D Printing) of Variable Stiffness Composite Structures

Authors :- Zhenyi Yuan, Xinxing Tong, Guigeng Yang, Zhenchao Yang, Danlong Song, Shujuan Li & Yan Li


Investigation of Silica-Based Shear Thickening Fluid in Enhancing Composite Impact Resistance

Authors :- Xihui Chen , Zhigang Sun, Peng Chen, Yingdong Song & Xuming Niu


Repair of Thin Face Sheet Sandwich Structure with Small Holes and Impact Damage

Authors :- Tianwei Yang, Zhaohui Wang, Shihai Tan & Fu Guo


Finite Element Simulation of Tensile Preload Effects on High Velocity Impact Behavior of Fiber Metal Laminates

Authors :- Enrique Alcudia-Zacarías , Arturo Abúndez-Pliego, Jan Mayén, Jorge Colín-Ocampo, Andrés Blanco-Ortega & Wilberth M. Alcocer-Rosado


Numerical and Experimental Investigation of Aluminum/CFRP Hybrid Tubes with Rubber-like Interlayer

Authors :- L. Prabhu , V. Krishnaraj, S. Sathish, S. Gokulkumar, M. R. Sanjay & S. Siengchin


Finite Element Analysis of the Crack Deflection in Fiber Reinforced Ceramic Matrix Composites with Multilayer Interphase Using Virtual Crack Closure Technique

Authors :- E. Kantarak, S. Rucman, T. Kumpika, W. Sroila, P. Tippo, A. Panthawan, P. Sanmuangmoon, A. Sriboonruang, N. Jhuntama, O. Wiranwetchayan, W. Thongsuwan & P. Singjai


Micromechanical Modelling of Dynamic Behavior of Advanced Sheet Molding Compound (A-SMC) Composite

Authors :- Rainer Glüge , Holm Altenbach, Nasir Mahmood & Mario Beiner


Two Hybrid Approaches to Fatigue Modeling of Advanced-Sheet Molding Compounds (A-SMC) Composite

Authors :- Binbin Li, Xingbang Wang, Bangxiao Mao, Tao He & Haiquan Huang


High-Speed Forming of Continuous Fiber Reinforced Thermoplastics

Authors :- Mikhail A. Tashkinov & Valeriy P. Matveenko


Design Optimization of a Braided Roof Frame Reinforcement by Process-Integrated Local Customization of Component Properties

Authors :- Haibao Liu, Jun Liu, Yuzhe Ding, Jin Zhou, Xiangshao Kong, Bamber R.K. Blackman, Anthony J. Kinloch, Brian G. Falzon & John P. Dear


Direct Processing of Structural Thermoplastic Composites Using Rapid Isothermal Stamp Forming

Authors :- Trevor Sabiston, Bin Li, Jidong Kang, Jie Liang, David Wilkinson & Carlos Engler-Pinto


Effect of a Post-Fatigue Damage on the Residual Dynamic Behavior of Advanced-SMC Composites

Authors :- Whenchao Huang, Liyang Xie, Changyou Li, Dawei Jia, Bao Chai, Yingzi Mu, Chunming Hou & Weibing Dai


Multi-Scale Modeling and Experimental Study of the Strength of Plain-Woven SiC/SiC Composites

Authors :- Qiangjun Zhang , Yong C Wang, Constantinos Soutis, Colin G. Bailey & Yuan Hu


Experimental Investigation of Fastener Pull-out Response in Composite Joints under Static and Dynamic Loading Rates

Authors :- Claudia Barile, Caterina Casavola, Giovanni Pappalettera, Carmine Pappalettere & Paramsamy Kannan Vimalathithan


Two-Scale Prediction of Effective Thermal Conductivity of 3D Braided C/C Composites Considering Void Defects by Asymptotic Homogenization Method

Authors :- America Califano , Neha Chandarana, Luigi Grassia, Alberto D’Amore & Constantinos Soutis


Effects of Pore on Thermal Diffusivity and Thermal Radiation Properties of C/SiC Composites at High Temperatures

Authors :- M. A. Laribi, R. TieBi, S. Tamboura, M. Shirinbayan, A. Tcharkhtchi, H. Ben Dali & J. Fitoussi


An Investigation into Process Parameters Effect on the Formability of GLARE Materials Using Stamp Forming

Authors :- David Colin , Sylvain Bel, Thorsten Hans, Mathias Hartmann & Klaus Drechsler


Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP

Authors :- Marco Povolo , Johnnidel Tabucol, Tommaso M. Brugo & Andrea Zucchelli


Injection-Compression-Compression Process for Preparation of High-Performance Conductive Polymeric Composites

Authors :- Chun-yen Hsu, Yuying Zhang, Prashant Karandikar, Fei Deng & Chaoying Ni


Rapid Preparation of 2D C/C Composite by Moulding Method Based on Recycled Carbon Fiber

Authors :- Li Cuiyan, Xu Zhao, Ouyang Haibo, Chang Liyuan, Huang Jianfeng & Liu Yijun


Numerical and Experimental Investigation of a Laminated Aluminum Composite Structure

Authors :- Julia Beter , Bernd Schrittesser, Gerald Meier, Peter Filipp Fuchs & Gerald Pinter


Telescopic Hydraulic Cylinder Made of Composite Material

Authors :- Sébastien Joannès, Faisal Islam & Lucien Laiarinandrasana


Cohesive Model for the Simulation of Crack Initiation and Propagation in Mixed-Mode I/II in Composite Materials

Authors :- Andrei V. Malakhov , Alexander N. Polilov, Junkang Zhang, Zhanghao Hou & Xiaoyong Tian


Axial Crushing Behavior of Braided Carbon/Polyurethane Composite Tubes

Authors :- Marco Povolo , Tommaso M. Brugo & Andrea Zucchelli


A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

Authors :- H. Ayari, M. Shirinbayan , A. Imaddahen, S. Tamboura, H. Ben Daly, A. Tcharkhtchi & J. Fitoussi


Damage Characteristics of CFRP Laminates Subjected to Multiple Lightning Current Strike

Authors :- Di Li, Yingguang Li , Jing Zhou & Zhiwei Zhao


Bird-Strike Damage Analysis and Preliminary Design of Composite Radome Structure Using Smoothed Particle Hydrodynamics

Authors :- H. Ayari, J. Fitoussi, A. Imaddahen, S. Tamboura, M. Shirinbayan, H. Ben Dali & A. Tcharkhtchi


Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation

Authors :- Tobias Mattner , Julian Popp, Tobias Kleffel, Christian Gröschel & Dietmar Drummer


Theoretical Analysis on Needle-Punched Carbon/Carbon Composites

Authors :- Yiru Ren, Zhihui Liu, Hongyong Jiang & Jianqiang Zheng


On the Design and Simulation of Hybrid Metal-Composite Gears

Authors :- Eric Eschler , Thomas Miadowitz, Swen Zaremba & Klaus Drechsler


Reversed-Air Cooling Technology for High-Quality Drilling of CFRP

Authors :- N. Reynolds , S. Awang-Ngah, G. Williams & D. J. Hughes


A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials

Authors :- M. Shirinbayan, J. Fitoussi, F. Meraghni, S. Farzaneh, B. Surowiec & A. Tcharkhtchi


Influence of the Ply Angle Deviation on the Out-of-Plane Deformation of the Composite Space Mirror

Authors :- Xiguang Gao , Hongnian Dong, Sheng Zhang & Yingdong Song


Manufacturing and Flexural Characterization of Infusion-Reacted Thermoplastic Wind Turbine Blade Subcomponents

Authors :- Jun Liu, Haibao Liu, Cihan Kaboglu, Xiangshao Kong, Yuzhe Ding, Hui Chai, Bamber R. K. Blackman, Anthony J. Kinloch & John P. Dear


Fatigue Hysteresis Loops Simulation of SiCf /Ti Composites under Two-Stage Cyclic Loading

Authors :- Zhenyu Wu, Lin Shi, Xiaoying Cheng , Yisheng Liu & Xudong Hu


Microscopic Mechanism of the High-Temperature Strength Behaviour of a C/SiC Composite

Authors :- Chunyang Zhao, Bo Yang , Shilong Wang, Chi Ma, Sibao Wang & Fengyang Bi


Influence Factors on Grinding Force in Surface Grinding of Unidirectional C/SiC Composites

Authors :- Mengyang Shi, Daming Wu, Ying Liu, Yao Huang, Jingyao Sun & Chong Leng


Thermal Stability Analysis and Experimental Study of a New Type of Grid-Reinforced Carbon Fiber Mirror

Authors :- Jifeng Wang, Reza Bihamta, Tyler P. Morris & Ye-Chen Pan


Fatigue Behaviour of Acrylic Matrix Composites: Influence of Seawater

Authors :- Arun Krishnan, Andrew Conway & Xinran Xiao


Numerical Analysis on Process-Induced Residual Stress in Thick Semi-Cylindrical Composite Shell Using a State-Dependent Viscoelastic Model

Authors :- Fan Wan, Talha J. Pirzada, Rongjun Liu, Yanfei Wang, Changrui Zhang & Thomas James Marrow


Numerical Investigation on Water Blast Response of Freestanding Carbon Fiber Reinforced Composite Sandwich Plates with Square Honeycomb Cores

Authors :- Qiaole Hu, Yihui Zhang, Yanyun Mao, Hafeezullah Memon, Yiping Qiu, Yi Wei & Wanshuang Liu


Stability Analysis of Composite Columns under Eccentric Load

Authors :- Meng Han & Vadim V. Silberschmidt


Destructive and Nondestructive Evaluation of Dry Spots in Thick Glass Fiber Reinforced Composites

Authors :- Piervincenzo G. Catera , Domenico Mundo, Alessandra Treviso, Francesco Gagliardi & Amit Visrolia


Topology Optimization of Lightweight Lattice Structural Composites Inspired by Cuttlefish Bone

Authors :- Fu-ji Wang , De Cheng, Bo-yu Zhang, Jian-bo Yan, Jian-wei Ma, Ze-gang Wang & Shuai-fei Wang


Simulation and Experimental Study on Surface Formation Mechanism in Machining of SiCp/Al Composites

Authors :- F. Bucciarelli, G. P. Malfense Fierro, M. Zarrelli & M. Meo


Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins

Authors :- Qingnian Liu, Yong Cai, Xiaojing Liu, Zhiyong Yang, Shuai Jiang & Shuang Leng


Damping Analysis of Cylindrical Composite Structures with Enhanced Viscoelastic Properties

Authors :- Zhun Liu, Zhidong Guan , Riming Tan & Jifeng Xu


Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage

Authors :- Robynne E. Murray , Dayakar Penumadu, Dylan Cousins, Ryan Beach, David Snowberg, Derek Berry, Yasuhito Suzuki & Aaron Stebner


Computation of the Distribution of the Fiber-Matrix Interface Cracks in the Edge Trimming of CFRP

Authors :- Zhenyi Yuan, Ben Zhang, Guigeng Yang, ZhenchaoYang, Aofei Tang, Shujuan Li, Yan Li, Pengkang Zhao & Yongjun Wang


Influence of Layup Sequence on the Surface Accuracy of Carbon Fiber Composite Space Mirrors

Authors :- Weiyi Sun, Zhigang Sun , Qi Lu, Xihui Chen & Yingdong Song


Design Optimization of Hybrid FRP/RC Bridge

Authors :- Fei Su & Pengfei Huang


Design Optimization and Development of Tubular Isogrid Composites Tubes for Lower Limb Prosthesis

Authors :- Lifeng Zhang, Sheng Wang, Zhan Li, Weilin Qiao, Ying Wang & Tao Wang


Thermal Characterization of Carbon Fiber-Reinforced Carbon Composites

Authors :- Xudong Zhang, Junqiang Ren & Xiangdong Ding


Multi-Scale Analyses of Three Dimensional Woven Composite 3D Shell With a Cut Out Circle

Authors :- Liang Xu , Jiaoteng Ding, Yongjie Wang, Yongjie Xie, Xiaoge Wu & Zhen Ma


In Situ Strength Model for Continuous Fibers and Multi-Scale Modeling the Fracture of C/SiC Composites

Authors :- Ali Fouladi, Reza Jafari Nedoushan, Jalil Hajrasouliha, Mohammad Sheikhzadeh, Yong-Min Kim, Won-Jin Na & Woong-Ryeol Yu


Investigation on the Yarn Squeezing Effect of Three Dimensional Full Five Directional Braided Composites

Authors :- Long Wang , Kai Yuan, Xingang Luan, Zhiqiang Li, Guolin Feng & Jianguo Wu


A New Stitching Technology for Improved Thermal Insulation of 3D Nowoven Assemblies

Authors :- Jiangtao Zhang , Yanliang Qiao, Mei Zhang, Haixiao Hu, Pengcheng Zhai & Shuxin Li


Technology Development for Direct Weaving of Complex 3D Nodal Structures

Authors :- Jing Zhou, Yingguang Li , Libing Cheng & Linglin Zhang


Impregnation of Composite Materials: a Numerical Study

Authors :- Ke Li, Xuewen Liu, Yulong Jin, Hongzhong Qi, Xintian Liu & Shen Xu


Study on Forced Torsional Vibration of CFRP Drive-Line System with Internal Damping

Authors :- Hao Zhou, Tao Liu, Rui Guo , Rongzhong Liu & Pu Song


Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)

Authors :- Mahdi Yoozbashizadeh , Ehsan Barjasteh, Surajit Roy, Manoj Sampangi Ram & Skanda Rai


Anisotropic Dielectric Properties of Carbon Fiber Reinforced Polymer Composites during Microwave Curing

Authors :- Gilberto Fontecha Dulcey , Xavier Fischer, Pierre Joyot & Georges Fadel


Effect of Spring-in Deviation on Fatigue Life of Composite Elevator Assembly

Authors :- Gilberto Fontecha Dulcey, Xavier Fischer , Pierre Joyot & Georges Fadel


Failure Modeling of SiC/SiC Mini-Composites in Air Oxidizing Environments

Authors :- Jinguang Du , Haizhen Zhang, Wenbin He, Jun Ma, Wuyi Ming & Yang Cao


Design and Optimization of Composite Automotive Hatchback Using Integrated Material-Structure-Process-Performance Method

Authors :- Ffion A. Martin, Nicholas A. Warrior, Pavel Simacek, Suresh Advani, Adrian Hughes, Roger Darlington & Eissa Senan


Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates

Authors :- Mathias Kliem , Jan Høgsberg, Joachim Vanwalleghem, Angelos Filippatos, Stefan Hoschützky, Edith-Roland Fotsing & Christian Berggreen


Application of Bionic Design to FRP T-Joints

Authors :- P. Foster, G. Abdelal & A. Murphy


Design and modeling of a combined embedded enhanced honeycomb with tunable mechanical properties

Authors :- Sang Yoon Park , Chi Hoon Choi, Won Jong Choi & Seong Soon Hwang


Parameters Identification of Interface Friction Model for Ceramic Matrix Composites Based on Stress-Strain Response

Authors :- Shichen Liu , Lihui Lang, Shiwei Guan, Seigei Alexandrov & Yipan Zeng


A New Adaptive Response Surface Model for Reliability Analysis of 2.5D C/SiC Composite Turbine Blade

Authors :- Zhiyong Yang , Qingnian Liu, Boming Zhang, Liang Xu, Zhanwen Tang & Yongjie Xie


Study on Mechanical Behavior of CVD-SiC Coated C/SiC Composites under Simulated Space Environments

Authors :- Vasileios S. Papapetrou, Ali Y. Tamijani, Jeff Brown & Daewon Kim


Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts

Authors :- Diego Morais Junqueira, Guilherme Ferreira Gomes, Márcio Eduardo Silveira & Antonio Carlos Ancelotti Jr


Numerical Identification of Meso Length-Effect and Full-Field Edge-Effect of 3D Braided Composites

Authors :- J. D. Macias, J. Bante-Guerra, F. Cervantes-Alvarez, G. Rodrìguez-Gattorno, O. Arés-Muzio, H. Romero-Paredes, C. A. Arancibia-Bulnes, V. Ramos-Sánchez, H. I. Villafán-Vidales, J. Ordonez-Miranda, R. L


Modeling and Simulation of Voids in Composite Tape Winding Process Based on Domain Superposition Technique

Authors :- Hassan Saeed , Hartmut Rödel, Sybille Krzywinski & Lubos Hes


Effect of Nesting in Laminates on the Through-Thickness Permeability of Woven Fabrics

Authors :- Philipp Schegner , Monireh Fazeli, Cornelia Sennewald, Gerald Hoffmann & Chokri Cherif


Simulation and Experimental Validation of Spacer Fabrics Based on their Structure and YarnÕs Properties

Authors :- Zenong Fang, Min Li, Shaokai Wang , Yanxia Li, Xiaolei Wang, Yizhuo Gu, Qianli Liu, Jie Tian & Zuoguang Zhang


Stabilising and Trimming 3D Woven Fabrics for Composite Preforming Applications

Authors :- Elliott Baché , Chloé Dupleix-Couderc, Eric Arquis & Isabelle Berdoyes


Development & Characterization of Green Composites Using Novel 3D Woven Preforms

Authors :- Mo Yang, Yefa Hu, Jinguang Zhang, Guoping Ding & Chunsheng Song


The Need to Use Generalized Continuum Mechanics to Model 3D Textile Composite Forming

Authors :- Omid Nabinejad , D. Sujan, Muhammad Ekhlasur Rahman, Willey Yun Hsien Liew & Ian J. Davies


Numerical Modelling of 3D Braiding Machine with Variable Paths of the Carriers

Authors :- Linglin Zhang, Yingguang Li & Jing Zhou


Nonlinear Multi-Scale Modelling, Simulation and Validation of 3D Knitted Textiles

Authors :- Xudong Zhang, Junqiang Ren, Xiaofei Wang, Hongxiang Zong, Lishan Cui & Xiangdong Ding


Meso-Scale Finite Element Simulations of 3D Braided Textile Composites: Effects of Force Loading Modes

Authors :- Rubentheran Sivagurunathan , Saijod Lau Tze Way, Linkesvaran Sivagurunathan & Mohd. Yuhazri Yaakob


Surface Modification of Aramid Fibres with Graphene Oxide for Interface Improvement in Composites

Authors :- Wenliang Tang, Yan Chen, Haojun Yang, Hua Wang & Qiwei Yao


Surface Modification of Carbon Fibres for Interface Improvement in Textile Composites

Authors :- Guoqiang Yu, Xiguang Gao , Yue Chen & Yingdong Song


Determination of Materials for Hybrid Design of 3D Soft Body Armour Panels

Authors :- Xudong Yang, Lingyu Sun, Cheng Zhang, Lijun Li, Zongmiao Dai & Zhenkai Xiong


Fracture Toughness (Mode-I) of Para-Aramid/Phenolic Nano Preform Composites

Authors :- Jiazhi Pei , Xiaoping Wang, Jingyu Pei & Yang Yang


Mechanical Properties of Thermoplastic and Thermoset Composites Reinforced with 3D Biaxial Warp-knitted Fabrics

Authors :- Jalal Yousefi, Mehdi Ahmadi Najfabadi, Hossein Hosseini Toudeshky & Mehdi Akhlaghi


Micro-tomography based Geometry Modeling of Three-Dimensional Braided Composites

Authors :- Yaning Chang, Zhigang Sun, Weiyi Sun & Yingdong Song


Resin Viscosity Influence on Fiber Compaction in Tapered Resin Injection Pultrusion Manufacturing

Authors :- Xiang Yang, Cao Feng, Wang Yi, Li Guang-de & Cao Jie


Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models

Authors :- J. A. Rodríguez-González, C. Rubio-González, M. Jiménez-Mora, L. Ramos-Galicia & C. Velasco-Santos


Tensile Properties of Unsaturated Polyester and Epoxy Resin Reinforced with Recycled Carbon-Fiber-Reinforced Plastic

Authors :- S. Anandan, G. S. Dhaliwal, Z. Huo, K. Chandrashekhara, N. Apetre & N. Iyyer


Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes

Authors :- Romain Agogue, Naziha Chebil, Mylène Deleglise-Lagardere, Pierre Beauchene & Chung Hae Park


New Design Concept for an Excavator Arms by Using Composite Material

Authors :- Tyler J. Quill, Matthew K. Smith, Tony Zhou, Mohamed Gamal Shafik Baioumy, Joao Paulo Berenguer, Baratunde A. Cola, Kyriaki Kalaitzidou & Thomas L. Bougher


Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

Authors :- Julia Orlik, Kathrin Pietsch, Achim Fassbender, Olena Sivak & Konrad Steiner


Numerical Simulation of Thermal Response and Ablation Behavior of a Hybrid Carbon/Carbon Composite

Authors :- Alice E. Snape , Jody L. Turner, Hassan M. El-Dessouky, Mohamed N. Saleh, Hannah Tew & Richard J. Scaife


Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications

Authors :- Yasir Nawab , Muhammad Kashif, Muhammad Ayub Asghar, Ali Asghar, Muhammad Umair, Khubab Shaker & Muhammad Zeeshan


Applied Integrated Design in Composite UAV Development

Authors :- P. Boisse , R. Bai, J. Colmars, N. Hamila, B. Liang & A. Madeo


NiTi SMA Wires Coupled with Kevlar Fabric: a Real Application of an Innovative Aircraft LE Slat System in SMAHC Material

Authors :- Oliver Weeger , Amir Hosein Sakhaei, Ying Yi Tan, Yu Han Quek, Tat Lin Lee, Sai-Kit Yeung, Sawako Kaijima & Martin L. Dunn


Evaluation of Basalt Fibre Composites for Marine Applications

Authors :- A. C. Corbin, A. Kececi, F. Boussu , M. Ferreira & D. Soulat


Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load

Authors :- Jiawen Qiu, Jiashen Li, Zishun Yuan, Haoxian Zeng & Xiaogang Chen


Determination of Fracture Parameters for Multiple Cracks of Laminated Composite Finite Plate

Authors :- Haoxian Zeng, Zishun Yuan, Jiawen Qiu & Xiaogang Chen


Geometrical analysis of woven fabric microstructure based on micron-resolution computed tomography data

Authors :- Diantang Zhang, Guyu Feng, Mengyao Sun, Song Yu, Yuanhui Gu, Xiaodong Liu & Kun Qian


Mechanical Properties and Thermal Shock Resistance Analysis of BNNT/Si3N4 Composites

Authors :- Songjun Zhang, Hongyong Jiang, Yiru Ren, Zhansen Qian & Zheqi Lin


A Numerical/Experimental Study on the Impact and CAI Behaviour of Glass Reinforced Compsite Plates

Authors :- Ali Al-darkazali, P?nar Çolak, Kemal Kad?o?lu, Erdinç Günayd?n, Ibrahim Inanç & Özgür Demircan


Three-Point Flexural Properties of Bonded Reinforcement Elements for Pleasure Craft Decks

Authors :- Guodong Fang , Chenghua Chen, Shenggang Yuan, Songhe Meng & Jun Liang


Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

Authors :- H. Meftah , S. Tamboura, J. Fitoussi, H. BenDaly & A. Tcharkhtchi


Design of Tailored Non-Crimp Fabrics Based on Stitching Geometry

Authors :- A. El Moumen, M. Tarfaoui & K. Lafdi


Computational Analysis of Torsional Bulking Behavior of 3D 4-Directional Braided Composites Shafts

Authors :- Wenfeng Hao, Ye Liu, Xinrong Huang, Yinghua Liu & Jianguo Zhu


Experimental Investigations of Compressed Sandwich Composite/Honeycomb Cylindrical Shells

Authors :- Ruzhuan Wang, Xiaobo Li, Jing Wang, Bi Jia & Weiguo Li


Thermal response of a 4D carbon/carbon composite with volume ablation: a numerical simulation study

Authors :- Yves Davila , Laurent Crouzeix, Bernard Douchin, Francis Collombet & Yves-Henri Grunevald


Simulation of Degraded Properties of 2D plain Woven C/SiC Composites under Preloading Oxidation Atmosphere

Authors :- O. H. Hassoon, M. Tarfaoui, A. El Moumen, H. Benyahia & M. Nachtane


Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

Authors :- Shichen Liu , Lihui Lang, Ehsan Sherkatghanad, Yao Wang & Wencai Xu


Fatigue Hysteresis Behavior of 2.5D Woven C/SiC Composites: Theory and Experiments

Authors :- A. El Moumen, M. Tarfaoui, O. Hassoon, K. Lafdi, H. Benyahia & M. Nachtane


Fatigue of a 3D Orthogonal Non-crimp Woven Polymer Matrix Composite at Elevated Temperature

Authors :- Linyuan Wang , Shulei Song, Hongbo Deng & Kai Zhong


A Multi Material Shell Model for the Mechanical Analysis of Triaxial Braided Composites

Authors :- Yiru Ren, Songjun Zhang, Hongyong Jiang & Jinwu Xiang


Optimisation of Fabric Reinforced Polymer Composites Using a Variant of Genetic Algorithm

Authors :- Amit Kumar Srivastava, P. K. Arora, Sharad Chandra Srivastava, Harish Kumar & M. K. Lohumi


Static Design and Finite Element Analysis of Innovative CFRP Transverse Leaf Spring

Authors :- Helga Krieger , Gunnar Seide, Thomas Gries & Scott E. Stapleton


Mechanical Behaviour of 3D Multi-layer Braided Composites: Experimental, Numerical and Theoretical Study

Authors :- Shouren Wang, Gaoqi Wang, Daosheng Wen, Xuefeng Yang, Liying Yang & Peiquan Guo


Multi-Scale Finite Element Analyses of Thermal Conductivities of Three Dimensional Woven Composites

Authors :- Giovanni Perillo, Jens K. Jørgensen, Roberta Cristiano & Aniello Riccio


Numerical Investigation of Thermal and Thermo-mechanical Effective Properties for Short Fibre Reinforced Composite

Authors :- Peiyan Wang , Xinting Huang, Zhongnan Wang, Xiaoliang Geng & Yuansheng Wang


The Use of Sprint Interface Element Delamination Simulation of Sandwich Composite Beam

Authors :- Junxia Wang, Changlin Cao, Dingshan Yu & Xudong Chen


Co-Curing of CFRP-Steel Hybrid Joints Using the Vacuum Assisted Resin Infusion Process

Authors :- Zhiyong Yang, Zhanwen Tang, Yongjie Xie, Hanqiao Shi, Boming Zhang & Hongjun Guo


Tensile Properties and Failure Mechanism of 3D Woven Hollow Integrated Sandwich Composites

Authors :- Helga Krieger, Thomas Gries & Scott E. Stapleton


Meso-Scale Damage Simulation of 3D Braided Composites under Quasi-Static Axial Tension

Authors :- Elahe Omrani, Hossein Hasani & Sayed Houssain Dibajian


Spatial Evolution of the Thickness Variations over a CFRP Laminated Structure

Authors :- Xinrong Huang, Ye Liu, Wenfeng Hao, Yinghua Liu & Jianguo Zhu


A Cohesive Zone Approach for Fatigue-Driven Delamination Analysis in Composite Materials

Authors :- Peter W R Beaumont, Costas Soutis & Alastair Johnson


Compressive Behavior of 3D Woven Composite Stiffened Panels: Experimental and Numerical Study

Authors :- Xihui Chen, Zhigang Sun, Jianfen Sun & Yingdong Song


Measurement and Analysis of Drapeability Effects of Warp-Knit NCF with a Standardised, Automated Testing Device

Authors :- Cong Zhao, Jun Xiao , Yong Li, Qiyi Chu, Ting Xu & Bendong Wang


Optimization of Parameter Ranges for Composite Tape Winding Process Based on Sensitivity Analysis

Authors :- Qi Dong, Guoshun Wan, Yongzheng Xu, Yunli Guo, Tianxiang Du, Xiaosu Yi & Yuxi Jia


Fatigue Damage Mechanical Model of the Envelope Material for Stratospheric Airships

Authors :- J. J. Yin, F. Chang, S. L. Li, X. L. Yao, J. R. Sun & Y. Xiao


Tests on GFRP Pultruded Profiles with Channel Section Subjected to Web Crippling

Authors :- Xiaolei Zhu, Yang Liu, Yana Wang, Xiaofeng Lu & Lingxue Zhu


Multi-Scale Modeling the Mechanical Properties of Biaxial Weft Knitted Fabrics for Composite Applications

Authors :- Xuteng Hu, Zhigang Sun, Fushu Yang, Xihui Chen & Yingdong Song


Investigation on the Bearing Abilities of Three-Dimensional Full Five-Directional Braided Composites with Cut-Edge

Authors :- A. García-Carpintero, M. Herráez, J. Xu, C. S. Lopes & C. González


Finite Element Analysis of Warp-Reinforced 2.5D Woven Composites Based on a Meso-Scale Voxel Model under Compression Loading

Authors :- Zhiyong Yang, Jianbao Zhang, Yongjie Xie, Boming Zhang, Baogang Sun & Hongjun Guo


Repair of Composites: Design Choices Leading to Lower Life-Cycle Cost

Authors :- Andrei Axinte , Nicolae Taranu, Liliana Bejan & Iuliana Hudisteanu


Derivation of Path Independent Coupled Mix Mode Cohesive Laws from Fracture Resistance Curves

Authors :- Jian Deng, Guangming Zhou , Le Ji & Xiaopei Wang


Oblique Low-Velocity Impact on Fiber-Metal Laminates

Authors :- Mi Zhang, Zhidong Guan, Xiaodong Wang & Shanyi Du


Effect of Nesting on the Permeability of Multilayer Unidirectional Fabrics

Authors :- Zhaojie Ji, Zhidong Guan & Zengshan Li


A Mathematical Model for Continuous Fiber Reinforced Thermoplastic Composite in Melt Impregnation

Authors :- J.J. Yin, F. Chang, S.L. Li, X.L. Yao, J.R. Sun & Y. Xiao


Synergistic Effects of Temperature and Oxidation on Matrix Cracking in Fiber-Reinforced Ceramic-Matrix Composites

Authors :- Jianwen Chen, Wujun Chen, Mingyang Wang, Yong Ding, Han Zhou, Bing Zhao & Jin Fan


Design and Ballistic Performance of Hybrid Composite Laminates

Authors :- Alexander Streitferdt, Natalie Rudolph & Iman Taha


Tearing Behaviors of Flexible Fiber-Reinforced Composites for the Stratospheric Airship Envelope

Authors :- Chang Liu, Deng’an Cai, Guangming Zhou & Fangzhou Lu


The Effect of Shear Mixing Speed and Time on the Mechanical Properties of GNP/Epoxy Composites

Authors :- Yves Davila, Laurent Crouzeix, Bernard Douchin, Francis Collombet & Yves-Henri Grunevald


Influence of Tow Architecture on Compaction and Nesting in Textile Preforms

Authors :- Diantang Zhang, Li Chen, Ying Sun, Yifan Zhang & Kun Qian


Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites

Authors :- Patryk Rozylo, Andrzej Teter, Hubert Debski, Pawel Wysmulski & Katarzyna Falkowicz


Tensile Response of Hoop Reinforced Multiaxially Braided Thin Wall Composite Tubes

Authors :- Guangming Zhou , Ruqin Pan, Chao Li, Deng’an Cai & Xiaopei Wang


Numerical and Experimental Investigation of the Hydrostatic Performance of Fibre Reinforced Tubes

Authors :- Guangming Zhou , Chang Liu, Deng’an Cai, Wenlong Li & Xiaopei Wang


Fatigue Behaviour of Composite T-Joints in Wind Turbine Blade Applications

Authors :- Tao Yu, Yaoyao Shi, Xiaodong He, Chao Kang, Bo Deng & Shibo Song


Multifunctional Carbon Fibre Tapes for Automotive Composites

Authors :- Junhui Meng, Zhipeng Qu, Weiyu Zhu & Mingyun Lv


Microwaves Sensor for Wind Turbine Blade Inspection

Authors :- Wenxue Zhang & Yu Chen


Structural Health Monitoring Using Lamb Wave Reflections and Total Focusing Method for Image Reconstruction

Authors :- Yibo Wang, Zhenguo Liu, Bing Lei, Xiang Huang & Xiaokang Li


Multi-scale Model of Residual Strength of 2D Plain Weave C/SiC Composites in Oxidation Atmosphere

Authors :- Diantang Zhang, Li Chen, Yanjie Wang, Ying Sun, Na Jia & Kun Qian


A New Approach for Quantitative Evaluation of Ultrasonic Wave Attenuation in Composites

Authors :- S. Farajzadeh Khosroshahi , U. Galvanetto & M. Ghajari


Effect of Piezoelectric Implant on the Structural Integrity of Composite Laminates Subjected to Tensile Loads

Authors :- Christos Kassapoglou , Konstantin Rangelov & Svilen Rangelov


Influence of Sea Water Aging on the Mechanical Behaviour of Acrylic Matrix Composites

Authors :- Bo Wang, Kuo Tian, Haixin Zhao, Peng Hao, Tianyu Zhu, Ke Zhang & Yunlong Ma


Stability of Three-Layered Annular Plate with Composite Facings

Authors :- M. Heydari-Meybodi , H. Mohammadkhani & M. R. Bagheri


Material Models Used to Predict Spring-in of Composite Elements: a Comparative Study

Authors :- Jianjun Jiang, Yang Su, Linchao Zhou, Qiang Guo, Chumeng Xu, Guoli Deng, Xing Chen, Xuming Yao & Liangchao Fang


On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces

Authors :- Junhui Meng, Penghui Li, Guangyuan Ma, Huafei Du & Mingyun Lv


Tensile Properties and Failure Mechanism of a New 3D Nonorthogonal Woven Composite Material

Authors :- Asimina Manta, Matthieu Gresil & Constantinos Soutis


Circular Functions Based Comprehensive Analysis of Plastic Creep Deformations in the Fiber Reinforced Composites

Authors :- Edward Pullicino, Wentao Zou, Matthieu Gresil & Costas Soutis


The Effects of Debonding on the Low-Velocity Impact Response of Steel-CFRP Fibre Metal Laminates

Authors :- Quentin-Arthur Poutrel, Zixin Wang, Dongyi Wang, Constantinos Soutis & Matthieu Gresil


Finite Element Simulation of Low Velocity Impact Damage on an Aeronautical Carbon Composite Structure

Authors :- Mohamed Nasr Saleh, Ying Wang, Arief Yudhanto, Adam Joesbury, Prasad Potluri, Gilles Lubineau & Constantinos Soutis


Simulating Initial and Progressive Failure of Open-Hole Composite Laminates under Tension

Authors :- Sree Shankhachur Roy, Prasad Potluri & Constantinos Soutis


Influence of Copper Layer Content in the Elastic and Damping Behavior of Glass-Fiber/Epoxy-Resin Composites

Authors :- S. Pavlopoulou, S. S. Roy, M. Gautam, L. Bradshaw & P. Potluri


Comparison of Fatigue Life Between C/SiC and SiC/SiC Ceramic-Matrix Composites at Room and Elevated Temperatures

Authors :- Ak?n Ata?, Mayank Gautam, Constantinos Soutis & Prasad Potluri


Influence of the Geometric Parameters on the Mechanical Behaviour of Fabric Reinforced Composite Laminates

Authors :- Zhen Li, Arthur Haigh, Constantinos Soutis , Andrew Gibson & Robin Sloan


Strength Analysis and Process Simulation of Subway Contact Rail Support Bracket of Composite Materials

Authors :- Matthieu Gresil , Vincent Revol, Konstantinos Kitsianos, Georges Kanderakis, Ilias Koulalis, Marc-Olivier Sauer, Hervé Trétout & Ana-Maria Madrigal


Effect of Ductile Agents on the Dynamic Behavior of SiC3D Network Composites

Authors :- Neha Chandarana, Henri Lansiaux & Matthieu Gresil


Prediction of Process-Induced Distortions in L-Shaped Composite Profiles Using Path-Dependent Constitutive Law

Authors :- Aurelia Muller , Bradley Robertson-Welsh, Patrick Gaydecki, Matthieu Gresil & Constantinos Soutis


Optimization of the Temperature-Time Curve for the Curing Process of Thermoset Matrix Composites

Authors :- Xihui Chen, Zhigang Sun, Jianfen Sun & Yingdong Song


Simulation of Lightning-Induced Delamination in Un-protected CFRP Laminates

Authors :- G. Martakos, J. H. Andreasen, C. Berggreen & O. T. Thomsen


Material and Geometric Nonlinear Analysis of Functionally Graded Plate-Shell Type Structures

Authors :- Junhui Meng, Mingyun Lv, Zhipeng Qu & Penghui Li


Forming Simulation of Thick AFP Laminates and Comparison with Live CT Imaging

Authors :- Khaled Giasin, Sabino Ayvar-Soberanis, Toby French & Vaibhav Phadnis


Impact Analysis of Embedded Delamination Location in Hybrid Curved Laminated Composite Stiffened Panel

Authors :- Xiao-kang Li, Zhen-guo Liu, Long Hu, Yi-bo Wang, Bing Lei & Xiang Huang


Modelling of Failure of Woven Composites. Part 1: Nomenclature Defining the Interzone Concept

Authors :- Feng Ren, Cong Zhang, Yang Yu, Chunling Xin, Ke Tang & Yadong He


Meso-Scale Modeling to Characterize Moisture Absorption of 3D Woven Composite

Authors :- Gangadhara Rao T. Boyina, Vijaya Kumar Rayavarapu & Subba Rao V. V.


Stability of 3D Textile Composite Reinforcement Simulations: Solutions to Spurious Transverse Modes

Authors :- R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch & M. Kästner


Lightning Strike Ablation Damage Characteristic Analysis for Carbon Fiber/Epoxy Composite Laminate with Fastener

Authors :- T. Pärnänen, A. Vänttinen, M. Kanerva, J. Jokinen & O. Saarela


Investigation on the Geometric Imperfections driven Local Buckling Onset in Composite Conical Shells

Authors :- Roger Pierre Lemanle Sanga, Christian Garnier & Olivier Pantalé


A Joint Numerical-Experimental Study on Impact Induced Intra-laminar and Inter-laminar Damage in Laminated Composites

Authors :- V. H. Carneiro, P. Capela, J. C. Teixeira, S. Teixeira, F. Cerqueira, F. Macedo, L. Ribas & D. Soares


A Static Burst Test for Composite Flywheel Rotors

Authors :- Zhi Sun, Xiaozhi Hu, Shanshan Shi, Xu Guo, Yupeng Zhang & Haoran Chen


Design and Manufacture of Conical Shell Structures Using Prepreg Laminates

Authors :- Andrei Axinte, Nicolae Taranu & Liliana Bejan


Modeling the Tensile Strength of Carbon Fiber ? Reinforced Ceramic ? Matrix Composites Under Multiple Fatigue Loading

Authors :- Boris N. Fedulov, Alexander A. Safonov, Ivan V. Sergeichev, Andrey E. Ushakov, Yuri G. Klenin & Irina V. Makarenko


Design of Cellular Composite Sandwich Panels for Maximum Blast Resistance Via Energy Absorption

Authors :- Dragan Aleksendri?, Pierpaolo Carlone & Velimir ?irovi?


Numerical Modeling of Combined Matrix Cracking and Delamination in Composite Laminates Using Cohesive Elements

Authors :- Changchun Wang, Guanghui Bai, Guangquan Yue, Zhuxi Wang, Jin Li & Boming Zhang


Numerical and Experimental Investigations on Deep Drawing of G1151 Carbon Fiber Woven Composites

Authors :- J. S. Moita, A. L. Araújo, C. M. Mota Soares, C. A. Mota Soares & J. Herskovits


Effect of Yarn Distortion on the Mechanical Properties of Fiber-Bar Composites Reinforced by Three-Dimensional Weaving

Authors :- Guangming Zhou, Deng’an Cai, Yuan Qian, Jian Deng & Xiaopei Wang


Damage Modes Recognition and Hilbert-Huang Transform Analyses of CFRP Laminates Utilizing Acoustic Emission Technique

Authors :- A. Thionnet, W. Trabelsi, Q. Roirand, A. R. Bunsell & L. Laiarinandrasana


A Discrete Model for Simulation of Composites Plate Impact Including Coupled Intra- and Inter-ply Failure

Authors :- L. Laiarinandrasana, W. Trabelsi, Q. Roirand, A. R. Bunsell & A. Thionnet


A Material Model for FE-Simulation of UD Composites

Authors :- R. L. Lanser & M. B. Ruggles-Wrenn


Finite Element Analysis of 2.5D Woven Composites, Part I: Microstructure and 3D Finite Element Model

Authors :- S. Mathieu, N. Hamila, F. Dupé, C. Descamps & P. Boisse


Effect of Fiber Poisson Contraction on Matrix Multicracking Evolution of Fiber-Reinforced Ceramic-Matrix Composites

Authors :- J. J. Yin, S. L. Li, X. L. Yao, F. Chang, L. K. Li & X. H. Zhang


Modelling Strategies for Predicting the Residual Strength of Impacted Composite Aircraft Fuselages

Authors :- Bing Lei, Zhenguo Liu, Jixuan Ya, Yibo Wang & Xiaokang Li


Investigation of Buckling Behavior of Composite Shell Structures with Cutouts

Authors :- Dominik Schueler, Nathalie Toso-Pentecôte & Heinz Voggenreiter


Analysis of the Numerical and Geometrical Parameters Influencing the Simulation of Mode I and Mode II Delamination Growth in Unidirectional and Textile Composites

Authors :- Maria Francesca Di Pasqua, Regina Khakimova, Saullo G. P. Castro, Mariano A. Arbelo, Aniello Riccio, Antonio Raimondo & Richard Degenhardt


Experimental Tests on the Composite Foam Sandwich Pipes Subjected to Axial Load

Authors :- Alessandra Treviso, Laszlo Farkas, Domenico Mundo & Michel Tournour


Long-Term Viscoelastic Response of E-glass/Bismaleimide Composite in Seawater Environment

Authors :- A. Riccio, F. Caputo, G. Di Felice, S. Saputo, C. Toscano & V. Lopresto


Predicting the Failure Behavior of Textile Composite Laminates by Using a Multi-Scale Correlating Approach

Authors :- Stefan Hartl, Alexander Schulz, Harald Sima, Thomas Koch & Manfred Kaltenbacher


Micromechanical Modeling for Tensile Behaviour of Carbon Fiber ? Reinforced Ceramic ? Matrix Composites

Authors :- Regina Khakimova, Florian Burau, Richard Degenhardt, Mark Siebert & Saullo G. P. Castro


Multiscale Modeling Methods for Analysis of Failure Modes in Foldcore Sandwich Panels

Authors :- Deepak Kumar, Rene Roy, Jin-Hwe Kweon & Jin-ho Choi


Experimental and Numerical Study on the Tensile Behaviour of UACS/Al Fibre Metal Laminate

Authors :- J. Navarro-Zafra, J. L. Curiel-Sosa & M. C. Serna Moreno


Experimental Fatigue Study of Composite Patch Repaired Steel Plates with Cracks

Authors :- Han WenQin, Luo Ying, Gu AiJun & Fuh-Gwo Yuan


Static Response and Failure Behavior of 2D C/SiC Cantilever Channel Beam

Authors :- Sebastian Jäger, Anthony Pickett & Peter Middendorf


The Surface Finish of Thermally Aged Carbon Fibre Reinforced Composites Using E-glass as a Surface Barrier

Authors :- Jian Song, Weidong Wen, Haitao Cui, Hongjian Zhang & Ying Xu


Quasi-static Load Sharing Model in the Case of Moulded Glass Fibre Reinforced Polyamide 6 Gears

Authors :- Jian Song , Weidong Wen, Haitao Cui, Hongjian Zhang & Ying Xu


Mechanical Performance and Failure Mechanism of Thick-walled Composite Connecting Rods Fabricated by Resin Transfer Molding Technique

Authors :- Frederic Lachaud, Christine Espinosa, Laurent Michel, Pierre Rahme & Robert Piquet


Numerical Investigation of the Ballistic Performance of Metal-Intermetallic Laminate Composites

Authors :- Mariano A. Arbelo, Annemarie Herrmann, Saullo G. P. Castro, Regina Khakimova, Rolf Zimmermann & Richard Degenhardt


Pull-Through Mechanical Behavior of Composite Fastener Threads

Authors :- Feng Li, QiLin Zhao, Kang Xu & DongDong Zhang


Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Authors :- P. F. Liu, Y. H. Yang, Z. P. Gu & J. Y. Zheng


Fibre Break Failure Processes in Unidirectional Composites. Part 3: Unidirectional Plies Included in Laminates

Authors :- J. Jakobsen, A. Skordos, S. James, R. G. Correia & M. Jensen


Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches

Authors :- T. M. Olson, Y. W. Kwon, D. C. Hart, D. C. Loup & E. A. Rasmussen


Predicting the Open-Hole Tensile Strength of Composite Plates Based on Probabilistic Neural Network

Authors :- Jia Xue, Wen-Xue Wang, Jia-Zhen Zhang, Su-Jun Wu & Hang Li


Characterizing and Modeling Brittle Bi-material Interfaces Subjected to Shear

Authors :- M. Yasaee, C. Killock, J. Hartley & I. P. Bond


Comparison between the Classic Sensor Embedding Method and the Monitoring Patch Embedding Method for Composites Instrumentation

Authors :- Julien Cathelin, Michèle Guingand, Jean-Pierre de Vaujany, Laurent Chazeau & Jérôme Adrien


Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms

Authors :- Wang Changchun, Bai Guanghui, Wang Yang, Zhang Boming & Pan Lijian


Parameterized Finite Element Modeling and Buckling Analysis of Six Typical Composite Grid Cylindrical Shells

Authors :- Frederic Lachaud, Christine Espinosa, Laurent Michel, Pierre Rahme & Robert Piquet


Finite Element Analysis of the Competition Between Crack Deflection and Penetration of Fiber-Reinforced Composites Using Virtual Crack Closure Technique

Authors :- Maria Francesca Di Pasqua, Regina Khakimova, Saullo G. P. Castro, Mariano A. Arbelo, Aniello Riccio & Richard Degenhardt


The Experiment and Numerical Simulation of Composite Countersunk-head Fasteners Pull-through Mechanical Behavior

Authors :- Gang Liu, Chuyang Luo, Daijun Zhang, Xueqin Li, Peng Qu, Xiaochen Sun, Yuxi Jia & Xiaosu Yi


Optimization and Reliability Analysis of 2.5D C/SiC Composites Turbine Stator Vane

Authors :- Yang Cao, Shifan Zhu, Chunhuan Guo, Kenneth S Vecchio & Fengchun Jiang


A New Magnetoelectric Composite with Enhanced Magnetoelectric Coefficient and Lower Resonance Frequency

Authors :- Liangchao Fang, Jianjun Jiang, Junbiao Wang & Chao Deng


Research of a Tram Headstock from Composite

Authors :- Zhidong Guan, Junwu Mu, Fei Su, Tianya Bian, Yongjie Huang & Zengshan Li


Influential Factors of Z-pin Bridging Force

Authors :- Geng Han, Zhidong Guan, Zengshan Li, Mi Zhang, Tianya Bian & Shanyi Du


Identification of Fracture Toughness for Discrete Damage Mechanics Analysis of Glass-Epoxy Laminates

Authors :- Alireza Sayyidmousavi, Habiba Bougherara & Zouheir Fawaz


The Friction Force Determination of Large-Sized Composite Rods in Pultrusion

Authors :- J. Sirtautas, A. K. Pickett & A. George


A Contribution to Time-Dependent Damage Modeling of Composite Structures

Authors :- A. Thionnet, H. Y. Chou & A. Bunsell


Ratcheting Assessment of GFRP Composites in Low-Cycle Fatigue Domain

Authors :- Bertram Stier, Jaan-Willem Simon & Stefanie Reese


Numerical Simulations of Inter-laminar Damage Evolution in a Composite Wing Box

Authors :- Christophe Baley, Marine Lan, Peter Davies & Denis Cartié


A Practical Tool for the Preliminary Design of Bonded Composite Repairs

Authors :- S. Laustsen, E. Lund, L. Kühlmeier & O. T. Thomsen


Simulating the Response of Composite Plates to Fire

Authors :- Jean-Vincent Risicato, Fern Kelly, Damien Soulat, Xavier Legrand, Wolfgang Trümper, Cedric Cochrane & Vladan Koncar


Composite Structural Analysis of Flat-Back Shaped Blade for Multi-MW Class Wind Turbine

Authors :- Ismet Baran, Jesper H. Hattel, Remko Akkerman & Cem C. Tutum


Holistic and Consistent Design Process for Hollow Structures Based on Braided Textiles and RTM

Authors :- S. Goutianos, R. Arévalo, B. F. Sørensen & T. Peijs


Finite Element Analysis of Thermo-Mechanical Properties of 3D Braided Composites

Authors :- Amandeep Singh Virk, Wayne Hall & John Summerscales


Investigations on Buckling Behaviour of Laminated Curved Composite Stiffened Panels

Authors :- Sui Liu, Zhidong Guan, Xia Guo, Kai Sun, Jiaoyue Kong & Dongxiu Yan


High Velocity Impact Response of Composite Lattice Core Sandwich Structures

Authors :- M. Torres, F. Collombet, B. Douchin, L. Crouzeix & Y-H. Grunevald


On the Problems of Cracking and the Question of Structural Integrity of Engineering Composite Materials

Authors :- Clément Dufour, Peng Wang, François Boussu & Damien Soulat


Atomic Models of Strong Solids Interfaces Viewed as Composite Structures

Authors :- Changliang Lai, Junbiao Wang & Chuang Liu


Damage Assessment of Composite Structures Using Digital Image Correlation

Authors :- Zhigang Sun, Chunyuan Kong, Xuming Niu, Yingdong Song & Xianqiao Wang


Intrinsic Safety Factors for Glass & Carbon Fibre Composite Filament Wound Structures

Authors :- Tian Zhang, Xiaofei Yang, Jun Ouyang, Shi Chen, Bei Tong, Ying Zhu & Yue Zhang


Damage Tolerance of Pre-Stressed Composite Panels Under Impact Loads

Authors :- Zdenek Malkovsky & Hedvika Kovandova


Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials

Authors :- Ai Shigang, Zhu Xiaolei, Mao Yiqi, Pei Yongmao & Fang Daining


Impact Damage to Composite Laminates: Effect of Impact Location

Authors :- Chenghu Li, Zhe Wu, Zhijun Meng & Muchen Li


Micro-Mechanical Parameters in Short Fibre Composite

Authors :- S. N. Grigoriev, A. N. Krasnovskii & I. A. Kazakov


Dynamic Responses of Composite Structures in Contact with Water While Subjected to Harmonic Loads

Authors :- Paul Treasurer, Yann Poirette, Dominique Perreux & Frédéric Thiebaud


Analysis of Bolted Flanged Panel Joint for GRP Sectional Tanks

Authors :- M. M. Shokrieh & A. Zeinedini


Recycling of Reinforced Plastics

Authors :- G. R. Ahmadzadeh & A. Varvani-Farahani


A Stacked-Shell Finite Element Approach for Modelling a Dynamically Loaded Composite Bolted Joint Under in-Plane Bearing Loads

Authors :- A. Riccio, G. Di Felice, G. LaManna, E. Antonucci, F. Caputo, V. Lopresto & M. Zarrelli


Numerical Simulation of Impact Responses on Through-thickness Stitched Foam Core Sandwich Composite

Authors :- A. Riccio, A. Raimondo, R. Borrelli, U. Mercurio, D. Tescione & F. Scaramuzzino


An Analytic Definition of the Border Polymerization Line for Axisymmetric Composite Rods

Authors :- Michele Guida, Francesco Marulo, Bruno Montesarchio & Massimiliano Bruno


Integrated Design For Manufacturing of Braided Preforms For Advanced Composites Part II: 3D Braiding

Authors :- A. Riccio, G. Di Felice, F. Scaramuzzino & A. Sellitto


Mode I Fracture Toughness Testing of Composite Pipes

Authors :- R. Böhm, A. Hornig, J. Luft, M. Becker, I. Koch, B. Grüber & W. Hufenbach


On the Through-the-Width Multiple Delamination, and Buckling and Postbuckling Behaviors of Symmetric and Unsymmetric Composite Laminates

Authors :- R. T. Durai Prabhakaran, Saju Pillai, Samuel Charca, Simin Ataollahi Oshkovr, Hans Knudsen, Tom Løgstrup Andersen, Jakob Ilsted Bech, Ole Thybo Thomsen & Hans Lilholt


Numerical Analysis of Thermodynamic Behaviour of Through-Thickness Stitched Sandwich Laminate

Authors :- Li-li Jiang, Guo-dong Xu, Su Cheng, Xia-mei Lu & Tao Zeng


Effect of Resin Viscosity in Fiber Reinforcement Compaction in Resin Injection Pultrusion Process

Authors :- D. Motamedi, A. S. Milani, M. Komeili, M. N. Bureau, F. Thibault & D. Trudel-Boucher


Contrast Enhancement of MicroCT Scans to Aid 3D Modelling of Carbon Fibre Fabric Composites

Authors :- Bing Wang, Guoqi Zhang, Shixun Wang, Li Ma & Linzhi Wu


Thermo-Chemical Modelling Strategies for the Pultrusion Process

Authors :- I. Staffell, J. L. Shang & K. Kendall


The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment

Authors :- M. A. Caminero, M. Lopez-Pedrosa, C. Pinna & C. Soutis


Analytical Model for Prediction of Reduced Strain Energy Release Rate of Single-Side-Patched Plates

Authors :- Alastair F. Johnson, Nathalie Toso-Pentecôte & Dominik Schueler


Effect of Manufacturing Method and Aging Environment on Painted Automotive Carbon Fibre Composite Surfaces

Authors :- Raúl Muñoz, Sofía Delgado, Carlos González, Bernardo López-Romano, De-Yi Wang & Javier LLorca


Analysis of Crushing Response of Composite Crashworthy Structures

Authors :- S. Lurie, M. Minhat, N. Tuchkova & J. Soliaev


Development and Mechanical Behavior of FML/Aluminium Foam Sandwiches

Authors :- Ioannou Ioannis, Hodzic Alma, Gitman Inna, Soutis Costas & M. A. Almaadeed


A Study on Flexural Properties of Sandwich Structures with Fiber/Metal Laminate Face Sheets

Authors :- S. M. Radhakrishnan, B. Dyer, M. Kashtalyan, A. R. Akisanya, I. Guz & C. Wilkinson


Effect of Moisture and Temperature on the Compressive Failure of CCF300/QY8911 Unidirectional Laminates

Authors :- R. D. Adams, Andrew Collins, Duncan Cooper, Mark Wingfield-Digby, Archibald Watts-Farmer, Anna Laurence, Kayur Patel, Mark Stevens & Rhodri Watkins


R-Curve Behavior of Si3N4/BNNT Composites

Authors :- S. N. Grigoriev, A. N. Krasnovskii, I. A. Kazakov & K. V. Kvachev


Damage Model and Progressive Failure Analyses for Filament Wound Composite Laminates

Authors :- R. Böhm, E. Hufnagl, R. Kupfer, T. Engler, J. Hausding, C. Cherif & W. Hufenbach


Wear Modalities and Mechanisms of the Mining Non-asbestos Composite Brake Material

Authors :- Zhang Yongbo, Fu Huimin, Wang Zhihua & Ma Xiaobin


Mechanical Analysis of Trapezoidal Corrugated Composite Skins

Authors :- E. Triki, B. Zouari, A. Jarraya & F. Dammak


Analysis of Laminated and Sandwich Composite Structures Using Solid-like Shell Elements

Authors :- Jesus A. Dominguez, Lanetra C. Tate, M. Clara Wright & Anne Caraccio


Effect of Fibre Volume Fraction on Mixed-Mode Fracture of a Fabric Carbon/Epoxy Composite

Authors :- Ai Shigang, Mao Yiqi, Pei Yongmao, Fang Daining & Tang Liqun


Optimization of the Thermosetting Pultrusion Process by Using Hybrid and Mixed Integer Genetic Algorithms

Authors :- Xin Jia, Zhengxiang Huang, Xudong Zu, Xiaohui Gu & Qiangqiang Xiao


A Study on Skin Delaminations Growth in Stiffened Composite Panels by a Novel Numerical Approach

Authors :- Luke P. Djukic, Garth M. Pearce, Israel Herszberg, Michael K. Bannister & David H. Mollenhauer


Cryogenic Interlaminar Fracture Properties of Woven Glass/Epoxy Composite Laminates Under Mixed-Mode I/III Loading Conditions

Authors :- Y. W. Kwon, W. Y. Lee, A. S. McGee, D. C. Hart, D. C. Loup & E. A. Rasmussen


Dimensional Changes in CFRP/PMI Foam Core Sandwich Structures

Authors :- M. L. de Souza, J. I. Mardel & B. L. Fox


New Design Concept for a Lifting Platform Made of Composite Material

Authors :- Hamidreza Allahbakhsh & Mahmoud Shariati


Objective Surface Evaluation of Fiber Reinforced Polymer Composites

Authors :- Matthew David, Alastair F. Johnson & H. Voggenreiter


Versatile Micromechanics Model for Multiscale Analysis of Composite Structures

Authors :- Fujun Xu, Lan Yao, Da Zhao, Muwen Jiang & Yipping Qiu


Spatial Wavelet Approach to Local Matrix Crack Detection in Composite Beams with Ply Level Material Uncertainty

Authors :- Haris Hameed Mian, Gang Wang, Uzair Ahmed Dar & Weihong Zhang


Optimization of Parts Placement in Autoclave Processing of Composites

Authors :- Wangqing Wu, Binyan Jiang, Lei Xie, Florian Klunker, Santiago Aranda & Gerhard Ziegmann


Stacking Sequence Effects on Fatigue Intra-laminar Damage Progression in Composite Joints

Authors :- X. X. Bian, Y. Z. Gu, J. Sun, M. Li, W. P. Liu & Z. G. Zhang


Thermomechanical Analysis of Shape-Memory Composite Tape Spring

Authors :- E. Z. Kordatos, D. G. Aggelis, K. G. Dassios & T. E. Matikas


Resin Flow of an Advanced Grid-Stiffened Composite Structure in the Co-Curing Process

Authors :- Marcelo Leite Ribeiro, Dirk Vandepitte & Volnei Tita


Strength Evaluation and Failure Prediction of Short Carbon Fiber Reinforced Nylon Spur Gears by Finite Element Modeling

Authors :- Jiusheng Bao, Yan Yin, Zhencai Zhu, Minming Tong, Yuhao Lu & Yuxing Peng